SKU: 1K0511327AR
Original price was: KSh1,380.00.KSh1,200.00Current price is: KSh1,200.00.
Add to wishlistAdd to compare| Weight | 0.5 kg |
|---|---|
| Dimensions | 20 × 15 × 10 cm |
| brand | OEM |
| condition | New |
| Component Type | Anti-Roll / Sway Bar Cushion Bushing |
| fitting-position | Rear Axle Anti-Roll Bar Base Left/Right |
| Inner Diameter | 18.5 mm Nominal Gauge |
| material | High-Elasticity Vulcanized EPDM Poly |
| Form | Split D-Shape Slotted Profile |
| Weight | 0.05 kg |
| Package Quantity | 1 Bushing Shell |
| Compatibility | Passat B6 18.5mm Rear Bar, VW Golf V/VI |
This replacement part is a direct-fit replacement for the listed application. It is intended to restore normal function without unnecessary complexity. Fitment detail: Rear, Lh, Rh, Stabilizer, Bar, Bush, Touran, Passat, 3C. Check the fitment before ordering.
| Make | Model | Year | Trim | Engine | Transmission | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VW | Golf V (1K1) | 2003-2009 | Trendline/Comfortline/GTI | All Engines | Manual/DSG | ||||||||||||||
| Update | |||||||||||||||||||
OEM
Dual Ball-Joint Stabilizer Droplink
Front Axle Left/Right Torsion Connection
95.0 mm Center-to-Center Pivot Points
M10 x 1.5 Pitch Threaded Studs
Heavy-Duty Injection-Moulded Carbon Polymer
OEM
Heavy-Duty Gas Charged Strut
Front Axle Left-Hand Side Specific
Forged Steel Lower Fork Mount Base
M16 Reinforced Top Mount Stem
Steel Coil Spring Suspension Layout
OEM
Straight Bolt-Through Connecting Rod
Rear Axle Anti-Roll Bar Attachment
95.0 mm Length End-to-End Pin Section
M10 x 1.5 Threads on Attachment Ends
Corrosion Shielded Forged Steel Rod
OEM
Multi-Link Trailing Arm Isolator Bushing
Rear Trailing Link Hub Carrier Interface
Outer Diameter 36.0 mm x Length 48.0 mm
12.0 mm Concentric Bolt Pin Location
Tear-Resistant Adaptive Compliance Rubber
OEM
Heavy-Duty Gas Charged Strut
Front Axle Right-Hand Side Specific
Forged Steel Lower Fork Mount Base
M16 Reinforced Top Mount Stem
Steel Coil Spring Suspension Layout
OEM
Pneumatic Air Strut Assembly
Rear Axle Drivetrain Location Point
Integrated ADS (Adaptive Damping System) Port
Conical Rolling Lobe Rubber Air Bladder
Up to 14.0 bar Back Axial Support
Mann-Filter
115.0 mm x 71.0 mm x 71.0 mm
Cartridge Element
29.0 mm
0.070 kg
1x Filter | 1x O-Ring
OEM
Panel Filter Insert
232 mm
138 mm
35 mm
Oiled Paper Medium
New
Home
Categories
Car filter
Search
Compare
Top
Reviews
There are no reviews yet.