SKU: 8K0407182A SCH
Original price was: KSh3,900.00.KSh3,000.00Current price is: KSh3,000.00.
Add to wishlistAdd to compare| brand | OEM |
|---|---|
| Bushing Component | Solid Rubber-Metal Suspension Pivot Joint |
| Mounting Position | Front Lower Control Arm (Forward Inner Seat) |
| Dimensions | Outer Diameter 41.0 mm x Length 60.0 mm |
| Inner Sleeve Diameter | 12.0 mm Mounting Bolt Sleeve Core |
| Material Structure | High-Durometer Elastomer Synthetic Rubber |
The 8K0407182A is a high-durability internal suspension control arm bushing designed for Audi longitudinal layouts. It features a vulcanized rubber-to-metal bond that handles heavy suspension compression loads, helping to maintain stable steering control and preventing early tire wear.
| Make | Model | Year | Trim | Engine | Transmission | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Audi | A4 (8K/B8) | 2007-2015 | SE/S Line/Avant | 2.0 TFSI/2.0 TDI | Manual/Multitronic/S-Tronic | ||||||||||||||
| Audi | A5 (8T) | 2007-2016 | Sportback/Coupe | 2.0 TFSI/2.0 TDI/3.0 TDI | Manual/S-Tronic | ||||||||||||||
| Audi | Q5 (8R) | 2008-2017 | SE/S Line | 2.0 TDI/2.0 TFSI/3.0 TDI | Manual/S-Tronic/Tiptronic | ||||||||||||||
| Update | |||||||||||||||||||
OEM
Hydro-Bushing (Fluid-Filled Damper Base)
Front Lower Control Arm (Rearward Position)
Outer Diameter 75.0 mm x Length 82.0 mm
12.0 mm Through-Bolt Core Hole
Natural Rubber / Steel Encapsulation Sleeve
Lemförder
Heavy SUV Dual Ball-Joint Rod Link
Front Axle Left/Right Roll Stabilization
124.0 mm Center-to-Center Joint Reach
M12 x 1.5 Heavy Gauge Joint Studs
Reinforced High-Tensile Forged Steel Structure
OEM
Gas Pressure Twin-Tube Strut
Front Axle (Platform Base Variant)
50 mm Lower Clamp Interface
Threaded Top Pin Connector End
MQB Modular Architecture Shock
OEM
Gas Pressure Hydraulic Shock
Front Axle (Compact Footprint Class)
45 mm Lower Strut Tube
Threaded M12 Top Pin Stem
PQ25 Compact Car Base Support
OEM
New
Suspension Control Arm with Bushing
Front Axle Lower (Left/Right)
Stamped Reinforced Steel Sheet
OEM
New
Anti-Roll / Sway Bar Cushion Bushing
Rear Axle Anti-Roll Bar Base Left/Right
18.5 mm Nominal Gauge
Generic
New
Engine Cylinder Head Gasket Profile
Multi-layer Steel (MLS) Performance Matrix
0.85 mm Compressed Target Gauge
OEM
New
Filter Insert Element
74 mm
31 mm
115 mm
With gasket & seals
MAX PART
Rear Axle
162.1 mm
73.5 mm
18 mm
Brembo Rear System
23694
Home
Categories
Car filter
Search
Compare
Top
Reviews
There are no reviews yet.