SKU: 8K0407183A FEBI
Original price was: KSh3,510.00.KSh2,700.00Current price is: KSh2,700.00.
Add to wishlistAdd to compare| brand | OEM |
|---|---|
| Bushing Component | Hydro-Bushing (Fluid-Filled Damper Base) |
| Mounting Position | Front Lower Control Arm (Rearward Position) |
| Dimensions | Outer Diameter 75.0 mm x Length 82.0 mm |
| Inner Sleeve Diameter | 12.0 mm Through-Bolt Core Hole |
| Material Structure | Natural Rubber / Steel Encapsulation Sleeve |
The 8K0407183A is a heavy-duty natural rubber and steel suspension control arm bushing designed for Audi multi-link front suspensions. It absorbs harsh road impacts and maintains correct control arm alignment, preventing uneven tire wear and steering wheel vibration.
| Make | Model | Year | Trim | Engine | Transmission | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Audi | A4 (8K/B8) | 2008-2015 | Premium/S-Line Front Lower Hydro-Bushing | 2.0TFSI / 2.0TDI (65mm Outer) | Manual/Quattro | ||||||||||||||
| Audi | A5 (8T) | 2007-2016 | Coupe/Sportback | 2.0TFSI / 3.0TDI (65mm Outer) | Multitronic/S-Tronic | ||||||||||||||
| Audi | Q5 (8R) | 2008-2017 | Premium/Premium Plus | 2.0TFSI / 3.0TFSI (65mm Outer) | Tiptronic | ||||||||||||||
| Update | |||||||||||||||||||
OEM
Gas Pressure Twin-Tube Strut
Front Axle Utility Extension Line
55 mm MQB Chassis Collar Interface
Threaded Top M14 Connector Pin
Heavy-Payload or Raised Clearance Valving
OEM
Straight Bolt-Through Connecting Rod
Rear Axle Anti-Roll Bar Attachment
95.0 mm Length End-to-End Pin Section
M10 x 1.5 Threads on Attachment Ends
Corrosion Shielded Forged Steel Rod
OEM
Gas Pressure Twin-Tube Strut
Front Axle (Left or Right Orientation)
55 mm Clamp Carrier Diameter
Threaded Top M14 Stem Interface
Conventional Coil-Spring Base Strut
OEM
Pneumatic Air Strut Assembly
Front Axle Left/Right Universal Strut
Integrated ADS (Adaptive Damping System) Valve
Reinforced Multi-Layer Rubber Air Sleeve
Up to 16.0 bar Ride Height Load
OEM
Dual Ball-Joint Stabilizer Droplink
Front Axle Left/Right Torsion Connection
95.0 mm Center-to-Center Pivot Points
M10 x 1.5 Pitch Threaded Studs
Heavy-Duty Injection-Moulded Carbon Polymer
OEM
New
Suspension Control Arm with Bushing
Front Axle Lower (Left/Right)
Stamped Reinforced Steel Sheet
Generic
New
Engine Coolant Thermostat with Housing
87 ?C Calibration
Cast Aluminium Core Design
BOSCH
M14x1.25
19 mm
16 mm
0.8 mm
Nickel-Copper Standard
28 Nm
Home
Categories
Car filter
Search
Compare
Top
Reviews
There are no reviews yet.