Description
This replacement part is a direct-fit replacement for the listed application. It is intended to restore normal function without unnecessary complexity. Fitment detail: Rear, Shocks, Golf, Audi, A3. Check the fitment before ordering.
Sale
OEM 1J0513025BG Rear Shocks – Golf, Audi
SKU: 1J0513025BG
Kenyan shilling (KSh) - KES
Original price was: KSh16,100.00.KSh14,000.00Current price is: KSh14,000.00.
Add to wishlistAdd to compareProduct information
| Weight | 0.5 kg |
|---|---|
| Dimensions | 20 × 15 × 10 cm |
| brand | OEM |
| condition | New |
| Component Type | Suspension Shock Absorber Strut |
| fitting-position | Rear Axle (Left/Right Layout) |
| Operating Mode | Gas Pressure Twin-Tube |
| Mounting System | Top Eye / Bottom Eye Ring Setup |
| Minimum Length | 380 mm Target |
| Maximum Length | 595 mm Target |
| Weight | 1.62 kg |
| Compatibility | Audi A3 8L FWD Base, VW Golf IV |
Description
Direct-fit replacement part for the listed application. For Rear, Shocks, Golf, Audi, A3 fitment.
Compatible vehicles
| Make | Model | Year | Trim | Engine | Transmission | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Audi | A3 (8L1) | 1996-2003 | Attraction | All Engines | Manual/Automatic | ||||||||||||||
| VW | Golf IV (1J1) | 1997-2005 | Trendline/Highline | All Engines | Manual/Automatic | ||||||||||||||
| Update | |||||||||||||||||||
Related products
- Add to wishlistAdd to compare
5Q0413031CJ, OEM Front Shock Absorber – Audi A3, Q
SKU: 5Q0413031CJProduct information
- brand
OEM
- Suspension Concept
Gas Pressure Twin-Tube Strut
- Mounting Position
Front Axle Utility Extension Line
- Strut Housing OD
55 mm MQB Chassis Collar Interface
- Piston Rod Stem
Threaded Top M14 Connector Pin
- System Operation
Heavy-Payload or Raised Clearance Valving
- brand
- Add to wishlistAdd to compare
OEM 036103085H, rotary shaft oil seal – Audi, A2,
SKU: 036103085HProduct information
- Weight0.5 kg
- Dimensions20 × 15 × 10 cm
- brand
OEM
- condition
New
- Component Type
Crankshaft Front End Oil Seal
- Inner Diameter
32 mm Shaft Fit
- Outer Diameter
42 mm Housing Fit
- Add to wishlistAdd to compare
OEM 0 242 145 541, Copper Spark Plug – BMW, Series
SKU: 0 242 145 541Product information
- Weight0.5 kg
- Dimensions20 × 15 × 10 cm
- brand
OEM
- condition
New
- Thread Size
M12x1.25
- Thread Length
26.5 mm
- Spanner Size
14 mm Bi-Hex Point Fitting
- Add to wishlistAdd to compare
7L0411311, Lemförder Front Stabilizer Sway Bar Link R
SKU: 7L0411311 LMFProduct information
- brand
Lemförder
- Link Component
Heavy SUV Dual Ball-Joint Rod Link
- Mounting Position
Front Axle Left/Right Roll Stabilization
- Length Dimension
124.0 mm Center-to-Center Joint Reach
- Thread Dimension
M12 x 1.5 Heavy Gauge Joint Studs
- Material Structure
Reinforced High-Tensile Forged Steel Structure
- brand
- Add to wishlistAdd to compare
1K0505543A, FEBI Rear Suspension Arm Bushing – Aud
SKU: 1K0505543A FEBIProduct information
- brand
OEM
- Bushing Component
Multi-Link Trailing Arm Isolator Bushing
- Mounting Position
Rear Trailing Link Hub Carrier Interface
- Dimensions
Outer Diameter 36.0 mm x Length 48.0 mm
- Inner Sleeve Diameter
12.0 mm Concentric Bolt Pin Location
- Material Structure
Tear-Resistant Adaptive Compliance Rubber
- brand
- Add to wishlistAdd to compare
2213205613, OEM Rear Airmatic Suspension Shock Absorber
SKU: 2213205613Product information
- brand
OEM
- Suspension Concept
Pneumatic Air Strut Assembly
- Mounting Position
Rear Axle Drivetrain Location Point
- System Controls
Integrated ADS (Adaptive Damping System) Port
- Air Spring Type
Conical Rolling Lobe Rubber Air Bladder
- Operating Pressure
Up to 14.0 bar Back Axial Support
- brand
Recently viewed products
- Add to wishlistAdd to compare
OEM 16546-3HD0A, Air Filter – Nissan, Note, Micra
SKU: 16546-3HD0AProduct information
- Weight0.5 kg
- Dimensions20 × 15 × 10 cm
- brand
OEM
- condition
New
- Filter Type
Panel Filter Element
- Length
236 mm Box Outline
- Width
114 mm Box Outline
- Add to wishlistAdd to compare
BOIGEVIS 06J127025G High Pressure Fuel Pump – AUDI
SKU: 06J127025GProduct information
- brand
BOIGEVIS
- Component Type
High Pressure Fuel Pump
- Operating Mode
Mechanical (Roller Tappet Actuated)
- Fuel Type
Petrol Direct Injection
- Maximum Pressure
150 bar
- condition
New
- Weight
0.96 kg
- brand
Home
Categories
Car filter
Search
Compare
Top
Reviews
There are no reviews yet.