Description
This replacement part is a direct-fit replacement for the listed application. It is intended to restore normal function without unnecessary complexity. Fitment detail: Rear, Shocks, Golf, Audi, A3. Check the fitment before ordering.
Sale
OEM 1J0513025BG Rear Shocks – Golf, Audi
SKU: 1J0513025BG
Kenyan shilling (KSh) - KES
Original price was: KSh16,100.00.KSh14,000.00Current price is: KSh14,000.00.
Add to wishlistAdd to compareProduct information
| Weight | 0.5 kg |
|---|---|
| Dimensions | 20 × 15 × 10 cm |
| brand | OEM |
| condition | New |
| Component Type | Suspension Shock Absorber Strut |
| fitting-position | Rear Axle (Left/Right Layout) |
| Operating Mode | Gas Pressure Twin-Tube |
| Mounting System | Top Eye / Bottom Eye Ring Setup |
| Minimum Length | 380 mm Target |
| Maximum Length | 595 mm Target |
| Weight | 1.62 kg |
| Compatibility | Audi A3 8L FWD Base, VW Golf IV |
Description
Direct-fit replacement part for the listed application. For Rear, Shocks, Golf, Audi, A3 fitment.
Compatible vehicles
| Make | Model | Year | Trim | Engine | Transmission | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Audi | A3 (8L1) | 1996-2003 | Attraction | All Engines | Manual/Automatic | ||||||||||||||
| VW | Golf IV (1J1) | 1997-2005 | Trendline/Highline | All Engines | Manual/Automatic | ||||||||||||||
| Update | |||||||||||||||||||
Related products
- Add to wishlistAdd to compare
2213205613, OEM Rear Airmatic Suspension Shock Absorber
SKU: 2213205613Product information
- brand
OEM
- Suspension Concept
Pneumatic Air Strut Assembly
- Mounting Position
Rear Axle Drivetrain Location Point
- System Controls
Integrated ADS (Adaptive Damping System) Port
- Air Spring Type
Conical Rolling Lobe Rubber Air Bladder
- Operating Pressure
Up to 14.0 bar Back Axial Support
- brand
- Add to wishlistAdd to compare
5Q0413031CJ, OEM Front Shock Absorber – Audi A3, Q
SKU: 5Q0413031CJProduct information
- brand
OEM
- Suspension Concept
Gas Pressure Twin-Tube Strut
- Mounting Position
Front Axle Utility Extension Line
- Strut Housing OD
55 mm MQB Chassis Collar Interface
- Piston Rod Stem
Threaded Top M14 Connector Pin
- System Operation
Heavy-Payload or Raised Clearance Valving
- brand
- Add to wishlistAdd to compare
8K0407183A, FEBI Suspension Control Arm Bushing –
SKU: 8K0407183A FEBIProduct information
- brand
OEM
- Bushing Component
Hydro-Bushing (Fluid-Filled Damper Base)
- Mounting Position
Front Lower Control Arm (Rearward Position)
- Dimensions
Outer Diameter 75.0 mm x Length 82.0 mm
- Inner Sleeve Diameter
12.0 mm Through-Bolt Core Hole
- Material Structure
Natural Rubber / Steel Encapsulation Sleeve
- brand
- Add to wishlistAdd to compare
OEM 036103085H, rotary shaft oil seal – Audi, A2,
SKU: 036103085HProduct information
- Weight0.5 kg
- Dimensions20 × 15 × 10 cm
- brand
OEM
- condition
New
- Component Type
Crankshaft Front End Oil Seal
- Inner Diameter
32 mm Shaft Fit
- Outer Diameter
42 mm Housing Fit
- Add to wishlistAdd to compare
7L0407182G, OEM Suspension Control Arm Bushing – A
SKU: 7L0407182GProduct information
- brand
OEM
- Bushing Component
Reinforced Heavy Carrier Silentbloc Joint
- Mounting Position
Front Lower Subframe Arm Inner Joint Eye
- Dimensions
Outer Diameter 60.5 mm x Length 70.0 mm
- Inner Sleeve Diameter
14.0 mm High-Tensile Bolt Bore Tube
- Material Structure
Vulcanized Heavy-Gauge Steel Outer Ring Core
- brand
- Add to wishlistAdd to compare
A001802609, AUTOSTAR Oil Filter – Mercedes-Benz, E
SKU: A001802609 AUTProduct information
- Weight0.5 kg
- Dimensions20 × 15 × 10 cm
- brand
AUTOSTAR GERMANY
- condition
New
- Filter Type
Filter Insert Element
- Outer Diameter
64 mm
- Inner Diameter
31 mm
Recently viewed products
- Add to wishlistAdd to compare
4M0819439B, AUTOSTAR Cabin AC Filter – Audi A4, A5
SKU: 4M0819439B AUTProduct information
- brand
OEM
- Dimensions
31.0 mm x 254.0 mm x 224.0 mm
- Filter Type
Activated Carbon Filter
- Media Material
Carbon Layer Poly-Fleece
- Functionality
Odour and PM2.5 Microparticle Shield
- Layout Cut
Angled Corner Edge
- brand
- Add to wishlistAdd to compare
OEM SR6680 Rack, End – Subaru Forester, Legacy
SKU: SR6680Product information
- Weight0.5 kg
- Dimensions20 × 15 × 10 cm
- brand
OEM
- condition
New
- Component Type
Steering Inner Rack End Axial Joint Link
- fitting-position
Front Axle Left or Right Steering Gear Node
- Thread Size 1
M16x1.5 Internal Steer Box Side Joint
Home
Categories
Car filter
Search
Compare
Top
Reviews
There are no reviews yet.