SKU: VW 8K0407152 F
Original price was: KSh7,800.00.KSh6,000.00Current price is: KSh6,000.00.
Add to wishlistAdd to compare| Weight | 0.5 kg |
|---|---|
| Dimensions | 20 × 15 × 10 cm |
| brand | Volkswagen |
| condition | New |
| Component Type | Suspension Wishbone Track Link |
| fitting-position | Front Axle Lower Right Forward |
| material | Drop Forged Structural Aluminium Alloy |
| Supplementary Info | Pre-pressed with vulcanized rubber pivot bush |
| Cone Size | 12 mm Standard Hub Receiver |
| Weight | 1.85 kg |
| Package Quantity | 1 Track Control Arm |
| Compatibility | Audi A4 B8, Audi A5 8T Front Suspension |
The Volkswagen 8K0407152 F is an OE-grade front axle right oe-grade control arm for the listed applications. It locates the wheel correctly and keeps the suspension moving on its intended arc. The direct-fit replacement helps reduce tyre wear, steering play, and alignment drift. It is specifically calibrated for the listed applications and supports accurate wheel positioning.
| Make | Model | Year | Trim | Engine | Transmission | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Audi | A4 B8 (8K2) | 2007-2015 | SE/S-Line | All Engines | Manual/Multitronic | ||||||||||||||
| Audi | A5 Sportback (8TA) | 2009-2017 | SE/S-Line | All Engines | Manual/S-Tronic | ||||||||||||||
| Update | |||||||||||||||||||
Generic
New
Suspension Control Arm Track Control Rod
Rear Axle Lower Front Left Side
Stamped Sheet Steel Assembly
Generic
New
Suspension Wishbone Control Arm Track Rod
Front Axle Lower Left Axle Rearward Control Link
High-grade Cast Aluminium Structural Base
Generic
New
Suspension Control Arm Track Link Wishbone
Front Axle Lower Lower Right Forward Track Arm
Drop Forged Structural Aluminium Alloy Core
FEBI BILSTEIN
New
Control Arm Rear Pivot Bushing in Console
Front Axle Lower Lower (Rear Position)
Reinforced Rubber / Aluminium Bracket
OEM
New
Suspension Wishbone Control Arm Track Link
Rear Axle Lower Forward Lower Trailing Arm
Drop Forged Structural Aluminium Alloy
FEBEST
New
Control Arm Rear Pivot Bushing in Console
Front Axle Lower Lower (Rear Position)
Premium Elastomer / Extruded Aluminium
OEM
280.0 mm x 160.0 mm x 160.0 mm
4.0 bar
Petrol
With Fuel Level Sensor
1x Fuel Pump Housing Assembly
OEM
312.0 mm Centred Width
25.0 mm New (22.0 mm Minimum Wear Limit)
Internally Vented Radial Core Fins
5×112 mm Multi-Fit Standard
65.0 mm Hub Pilot Bore Size
OEM
New
Panel Filter Element Core Variant
294 mm
228 mm
Generic
New
Engine Bonnet Hood Gas Support Lifter
350 N Pressure Rating
490 mm Total Extension Distance
BOSCH
M14x1.25
19 mm
16 mm
0.8 mm
Double Platinum Pins
28 Nm
Home
Categories
Car filter
Search
Compare
Top
Reviews
There are no reviews yet.